View All 350-601 Actual Free Exam Questions May 19, 2024 Updated
Pass Authentic Cisco 350-601 with Free Practice Tests and Exam Dumps
Cisco 350-601 certification exam consists of 90-110 questions and is a timed exam lasting up to 120 minutes. 350-601 exam questions are designed to test the candidate's knowledge of data center technologies and their ability to apply this knowledge in real-world scenarios. Candidates must possess a strong understanding of data center design, implementation, and troubleshooting to pass 350-601 exam. Implementing Cisco Data Center Core Technologies (350-601 DCCOR) certification is valid for three years and can be renewed by passing a recertification exam or earning Continuing Education credits.
NEW QUESTION # 24
Multiple roles are applied to a user on the Cisco MDS 9000 Series Switch. Which statement is true?
- A. Any commands that have conflicting settings between roles are denied.
- B. The last role assigned takes precedence over previous roles.
- C. Access to a command takes priority over being denied access to a command.
- D. The first role assigned takes precedence over subsequent roles.
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/5_0/configuration/guides/sec/nxos/ sec/clicfgur.html
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/8_x/config/security/ cisco_mds9000_security_config_guide_8x/configuring_users_and_common_roles.html
NEW QUESTION # 25
Multiple roles are applied to a user on the Cisco MDS 9000 Series Switch.
Which statement is true?
- A. Any commands that have conflicting settings between roles are denied.
- B. The last role assigned takes precedence over previous roles.
- C. Access to a command takes priority over being denied access to a command.
- D. The first role assigned takes precedence over subsequent roles.
Answer: C
NEW QUESTION # 26
A customer reports Fibre Channel login requests to a cisco MDS 9000 series Switch from an unauthorized source. The customer requires a feature that will allow all devices already logged in and learned in and learned to be added to the Fibre channel active database. Which two features must be enabled to accomplish this goal?
(Choose two.)
- A. Auto-learning
- B. Smart aliases
- C. Device aliases
- D. Port security
- E. Enhanced zoning
Answer: A,D
Explanation:
Explanation
https://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_3_x/configuration/guides/fm_3_3_1/p
NEW QUESTION # 27
Which statement about the MAC address that the FCoE Initialization Protocol chooses for use by an E-Node in an FCoE implementation is true?
- A. The FCoE Initialization Protocol uses the burned-in MAC address of the converged network adapter for all FCoE operations.
- B. FCoE does not use a MAC address. The FCoE Initialization Protocol is used to acquire a Fibre Channel ID, and the address is used for all FCoE communications in the same way as Fibre Channel Protocol.
- C. The FCoE Initialization protocol uses a 24-bit FC-MAP and concatenates a 24-bit Fibre Channel ID to create a fibric-provided MAC address.
- D. The FCoE Initialization Protocol uses 01.00.0C as the first 24 bits of the MAC address and appends a 24-bit Fibre Channel ID to derive a full 48-bit FCoE MAC address.
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Data_Center/UF_FCoE_final.html#wp1154912
NEW QUESTION # 28
Which two methods are available to manage an ACI REST API session authentication when a user is unauthenticated? (Choose two.)
- A. GET to aaaListDomains
- B. POST to aaaLogin
- C. DELETE to aaaLogout
- D. POST to aaaUserLogin
- E. GET aaaRefresh
Answer: B,E
Explanation:
Section: Automation
Explanation/Reference:
NEW QUESTION # 29
Refer to the exhibit.
Refer to the exhibit. Which backup operation type not include the preserve identities feature?
- A. All configuration
- B. Logical configuration
- C. Full state
- D. System configuration
Answer: C
NEW QUESTION # 30
A storage array must be connected to port ethernet1/10 on a Cisco MDS 9000 Series Switch In addition, the array must connect using the FCoE protocol and be single-homed Which configuration meets these requirements?
- A. Option A
- B. Option C
- C. Option B
- D. Option D
Answer: D
NEW QUESTION # 31
Refer to the exhibit.
Why does the Python code for Cisco NX-API print an error message?
- A. The "type" is wrong in the body of the request and should be "cli_conf"
- B. NX-API does not allow configuration for features via the requests module.
- C. The "type" is wrong in the header of the request and should be "cli_conf"
- D. The JSON is not a supported format for the NX-API.
Answer: B
Explanation:
Section: Automation
NEW QUESTION # 32
Refer to the exhibit.
What be connected to clear the HA NOT READY status?
- A. server chassis
- B. management ports
- C. network uplinks
- D. Layer 1-Layer 2 ports
Answer: A
NEW QUESTION # 33
An engineer updated firmware on Fabric Interconnects and activates it. However, the endpoint fails to boot from the new firmware image. What is expected to occur in this case?
- A. The system defaults to and boots into GOLD firmware image
- B. The system defaults to the GOLD firmware image
- C. The system defaults to and boots into kickstart image
- D. The system defaults to the backup image version
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/CLI-User-Guides/Firmware- Mgmt/4-0/ b_UCSM_CLI_Firmware_Management_Guide_4-0/ b_UCSM_CLI_Firmware_Management_Guide_4-0_chapter_011.html
NEW QUESTION # 34
A network engineer is adding a Cisco HyperFlex data platform to the Cisco Intersight management portal.
Which two components are required for Intersight to claim the Cisco HyperFlex data platform? (Choose two.)
- A. device serial number
- B. device ID
- C. device FQDN
- D. device public IP address
- E. device claim code
Answer: B,E
Explanation:
Section: Compute
NEW QUESTION # 35
Refer to the exhibit.
Cisco Fabric Services is enabled in the network. Which type of IP address is used by the Cisco Fabric Services protocol?
- A. IPv4 unicast address
- B. IPv4 anycast address
- C. IPv4 gateway address
- D. IPv4 multicast address
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/configuration/guide/fm/FabricManager/cfs.pdf
NEW QUESTION # 36
Drag and drop the network assurance concepts from the left onto the corresponding benefits on the right.
Answer:
Explanation:
NEW QUESTION # 37
Refer to the exhibit.
An engineer must configure FCoE on a Cisco Nexus switch. Which two command sets complete this configuration? (Choose two.)
- A. Option A
- B. Option C
- C. Option B
- D. Option D
- E. Option E
Answer: D,E
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/fcoe/421_n1_1/b_Cisco_n5k_fcoe_config_gd_re_421_n1_1/Cisco_n5k_fcoe_config_gd_re_421_n1_1_chapter4.html
NEW QUESTION # 38
An engineer is configuring VNTag between a virtualized server and a Cisco Nexus 5500 Series switch. Drag and drop the configuration steps from the into the correct order on the right.
Answer:
Explanation:
Explanation
install the virtualization feature set
Enable the virtualization feature set
Configure the port profile
Configure support for VNTag mode on the interface that connects to the server.
Configure the server to support NIV mode
Configure the vNICs of the server
NEW QUESTION # 39
What is required for using Ansible with HTTP/HTTPS protocol in a Cisco NX-OS environment?
- A. XML management interface
- B. NX-API
- C. SSH
- D. Open Agent Container
Answer: B
Explanation:
https://docs.ansible.com/ansible/2.5/modules/nxos_nxapi_module.html
https://docs.ansible.com/ansible/latest/network/user_guide/platform_nxos.html
NEW QUESTION # 40
A network engineer connects the CNA interface of a server to a switch. The switch must bring down all of the VLANs on the interface that are not enabled for FCoE, but the VLANs that are enabled for FCoE should continue to carry SAN traffic without interruption. Which configuration should be applied to the switch to achieve this objective?
- A. switch(config)# interface vfc 2 switch(config-if)# shutdown Ian
- B. switch(config)# Interface Ethernet vfc 2 switch(config-if)# shutdown force
- C. switch(config)# interface Ethernet 2/1 switch(config-if)# shutdown Ian
- D. switch(config)# interface Ethernet 2/1 switch(config-if)# shutdown force
Answer: C
NEW QUESTION # 41
......
The Cisco 350-601 exam consists of multiple-choice questions and simulation-based questions that test the candidate's ability to configure and troubleshoot data center technologies. Candidates are required to pass the exam with a minimum score of 825 out of 1000 to earn the Implementing Cisco Data Center Core Technologies certification.
Cisco 350-601 exam is designed for network professionals who have a minimum of three to five years of experience in designing, deploying, and managing data center technologies. 350-601 exam validates the candidate's knowledge and skills in implementing data center technologies, including network virtualization, automation, storage networking, and security. Implementing Cisco Data Center Core Technologies (350-601 DCCOR) certification is recognized globally and is highly valued by employers in the IT industry.
New 350-601 Exam Questions Real Cisco Dumps: https://prep4sure.real4dumps.com/350-601-prep4sure-exam.html
