Sep-2023 Pass Your 350-601 Exam at the First Try with 100% Real Exam
Get Real Exam Questions for 350-601 with New Questions
Cisco 350-601 exam is a prerequisite for several Cisco certifications, including the Cisco Certified Network Professional Data Center (CCNP Data Center) and the Cisco Certified Internetwork Expert Data Center (CCIE Data Center). By passing 350-601 exam, candidates can demonstrate their expertise in data center technologies and enhance their career prospects.
NEW QUESTION # 135
A cisco Nexus 9000 series switch experiences a startup configuration comuption. The engineer must implement a procedure to recover configuration file from the switch. Which command set must be used?
- A. 1. Copy the running-configuration to the startup configuration.
2. Clear the current configuration of the switch.
3. Restart the device.
4. Copy a previously saved configuration file to the running configuration. - B. 1.Restarting device.
2. Copy the running-configuration file to a remote server.
3. Clear the current configuration of the switch.
4. Copy the running configuration to the startup configuration - C. 1. Clear the current configuration of the switch
2. Restart the device.
3. Copy a previously saved configuration file to the running-configuration
4. Copy the running-configuration to the startup configuration. - D. 1. Clear the current configuration of the switch
2. Restart the device.
3. Copy the running configuration to the startup configuration
4. Copy a previously saved configuration file to the running configuration
Answer: C
Explanation:
Problems, such as memory corruption, can occur that make it necessary for you to recover your configuration from a backed-up version.
Each time that you enter a copy running-config startup-config command, a binary file is created and the ASCII file is updated. A valid binary configuration file reduces the overall boot time significantly. A binary file cannot be uploaded, but its contents can be used to overwrite the existing startup configuration. The write erase command clears the binary file.
SUMMARY STEPS
1. write erase
2. reload
3. copy configuration-file running-configuration
4. copy running-config startup-config
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/93x/fundamentals/configuration/guide/b-cisco-nexus-9000-nx-os-fundamentals-configuration-guide-93x/b-cisco-nexus-9000-nx-os-fundamentals-configuration-guide-93x_chapter_01010.html#task_1242440
NEW QUESTION # 136
A UCS B- Series server located in B5108 chassis 1 slot 1 is currently unavailable. The server needs to be associated with a specific service profile when it becomes available. Which associate service profile option should be selected to accomplish this goal?
- A. server pool
- B. server
- C. custom server
- D. restrict migration
Answer: C
Explanation:
Explanation
https://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/141/UCSM_GUI_Configuration
NEW QUESTION # 137
Refer to the exhibit.
Which two statements describe the routing table of the leaf switch? (Choose two.)
- A. The next hop 10.1.168.95 for route 172.16.100 0/24 is the TEP address of a border leaf in ACI.
- B. The next hop 10.0.1.14 for route 172.16.99.0/24 is the TEP address of a border leaf in ACI.
- C. The next hop 10.0.8.65 for route 10.20.1.0724 is the TEP address of a border leaf in ACI.
- D. 10.20.1.0/24 is a BD subnet in ACI.
- E. 172.16.100.0/24 is a BD subnet in ACI.
Answer: A,D
NEW QUESTION # 138
Host 1 is in VLAN 100 located is DataCenter 1 and Host2 is in VLAN200 located in DataCenter2. Which OTV VLAN mapping configuration allows Layer 2 connectivity between these two hosts?
- A. Option B
- B. Option A
- C. Option D
- D. Option C
Answer: A
NEW QUESTION # 139
An engineer configures a storage environment for a customer with high-security standards. The secure environment is configured in vsan 50. The customer wants to maintain a configuration and active databases and prevent unauthorized switches from joining the fabric. Additionally, the switches must prevent rogue devices from connecting to their ports by automatically learning the WWPNs of the ports connected to them for the first time. Which two configuration sets must be used to meet these requirements? (Chose two.)
- A. Option C
- B. Option B
- C. Option D
- D. Option A
- E. Option E
Answer: A,D
NEW QUESTION # 140
Refer to the exhibit.
Which two Cisco UCS components are upgraded as a result of the configuration? (Choose two.)
- A. Cisco UCS Manager
- B. IOMs
- C. adapters
- D. board controller
- E. BIOS
Answer: A,B
NEW QUESTION # 141
An engineer must configure remote authentication on a Cisco UCS system. The user password must be encrypted before it is sent to the authentication server. The company security policy requires the server to be based on an open standard. Drag and drop the UCS CLI AAA configuration commands from the left into the order in which they must be implemented on the right. Not all commands are used.
Answer:
Explanation:
Explanation
UCS-A# scope security
UCS-A /security # scope radius
UCS-A /security/radius # create server radiusserv7
UCS-A /security/radius/server* # set key
UCS-A /security/radius/server* # commit-buffer
NEW QUESTION # 142
Refer to the exhibit.
What is a characteristic presented in the service profile of the UUID?
- A. allocated from a UUID pool
- B. unique system generated
- C. vendor assigned
- D. based on the hardware
Answer: A
NEW QUESTION # 143
An engineer configures a role for a new user in Cisco UCS Manager The role should allow the user to configure vHBAs, vNICs, and server port types.
Which role should be assigned to allow the engineer to complete this task?
- A. operations
- B. server-compute
- C. network administrator
- D. AAA administrator
Answer: C
NEW QUESTION # 144
A storage engineer must configure zoning on a Cisco MDS 9000 Series switch. Drag and drop actions from the left into the order on right
Answer:
Explanation:
Explanation
Graphical user interface, table Description automatically generated with medium confidence
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/6_2/ configuration/guides/fabric/nx-os/nx_os_fabric/zone.html
NEW QUESTION # 145
Which virtual MAC address is the default for HSRP version 2 group 10?
- A. 0000.0C9F.F010
- B. 0000.5E00.0110
- C. 0000.0C9F.F00A
- D. 3719.0351.1C0A
Answer: C
NEW QUESTION # 146
An engineer updated firmware on Fabric Interconnects and activates it. However, the endpoint fails to boot from the new firmware image. What is expected to occur in this case?
- A. The system defaults to and boots into GOLD firmware image
- B. The system defaults to the GOLD firmware image
- C. The system defaults to and boots into kickstart image
- D. The system defaults to the backup image version
Answer: D
NEW QUESTION # 147
What is the benefit of adding Cisco HyperFlex Hardware Acceleration Cards to a HyperFlex deployment?
- A. GPU acceleration
- B. increased network throughput
- C. offline encryption acceleration
- D. Increased compression efficiency
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/hyperconverged_systems/HyperFlex_HX_DataPlatformSoftware/ Installation_VMWare_ESXi/3_5/b_HyperFlexSystems_Installation_Guide_for_VMware_ESXi_3_5/ b_HyperFlexSystems_Installation_Guide_for_VMware_ESXi_3_5_chapter_01100.html#:~:text=Overview%
20of%20HyperFlex%20Hardware%20Acceleration%20Cards,-This%20chapter%20provides&text=These%
20cards%20provide%20improved%20performance%20and%20compression%20efficiency%20for%20most
%20storage%20workloads.
NEW QUESTION # 148
An engineer must remove the running configuration of a Cisco Nexus 9000 Series Switch and replace it with a backup file without restarting the switch. The backup file is stored on an SFTP server that is reachable via the An engineer must remove the running configuration mgmt0 interface Which set of commands accomplishes this task'
- A. Option A
- B. Option C
- C. Option B
- D. Option D
Answer: B
NEW QUESTION # 149
An engineer must apply AAA configuration on a Cisco MDS 9000 Series Switch. The solution must meet these conditions:
It must use a challenge-response authentication protocol that uses MD5 hashing with an incrementally changing identifier The RADIUS configuration must t>e automatically shared with other MDS switches in the environment.
The RADIUS server is already defined. Which command set completes the configuration?
- A. Option A
- B. Option C
- C. Option B
- D. Option D
Answer: B
NEW QUESTION # 150
An engineer deploys a custom guest shell rootfs onto multiple switches. Drag and drop the steps from the left into the correct order on the right.
Answer:
Explanation:
Explanation
A picture containing text Description automatically generated
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/93x/progammability/guide/b-cisco-nex
NEW QUESTION # 151
A network engineer must migrate a Cisco WSA virtual appliance from one physical host to another physical host by using VMware vMotion. What is a requirement for both physical hosts?
- A. The hosts must have access to the same defined network.
- B. The hosts must run Cisco AsyncOS 10.0 or greater.
- C. The hosts must use a different datastore than the virtual appliance
- D. The hosts must run different versions of Cisco AsyncOS.
Answer: A
NEW QUESTION # 152
Which adjacency server configuration makes two OTV edge devices located in the same site bring up the dual-site adjacency?
A)
B)
C)
D)
- A. Option B
- B. Option A
- C. Option D
- D. Option C
Answer: A
NEW QUESTION # 153
An engineer is implementing security on the Cisco MDS 9000 switch. Drag drop the descriptions from the left onto the correct security features on the right.
Answer:
Explanation:
NEW QUESTION # 154
Which behavior defines streaming telemetry as a push model in Cisco devices?
- A. JSON encoded telemetry data is transported using the gRPC protocol
- B. Monitoring clients are pulling data from the network to see real-time statistics
- C. The network devices send data in JSON or GPB format to configured endpoints
- D. Events and network changes generate telemetry data
Answer: D
NEW QUESTION # 155
What is a recommended design choice in a topology for multipathing iSCSI traffic?
- A. two NICs bended together on the initiator
- B. single initiator to dual targets
- C. dual initiators to a single target with bonded interfaces
- D. initiators and targets in separate subnets
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus1000/sw/4_2_1_s_v_1_5_1/ system_management/configuration/guide/n1000v_system/n1000v_system_13iscsi.html#wp1052813
NEW QUESTION # 156
Which two configuration settings are available in the Cisco UCS Firmware Auto Sync Server policy? (Choose two.)
- A. User Acknowledge
- B. No Action
- C. Delayed Action
- D. Immediate Action
- E. User Notification
Answer: A,B
NEW QUESTION # 157
An engineer deploys a custom guest shell rootfs onto multiple switches. Drag and drop the steps from the left into the correct order on the right.
Answer:
Explanation:
Explanation
export the guest shell rootfs step 1
store it in a file server step 2
Customize the guest shel rootfs step 3
import the guest shell rootfs to other switches step 4
install the specific guest shell across devices simultaneously step 5
NEW QUESTION # 158
Refer to the exhibit.
Refer to the exhibit. An engineer must invoke a Python script that alerts the operations team when the router DC-RTR-1 becomes unreachable. Which configuration set accomplishes this task?
- A. Option A
- B. Option B
- C. Option D
- D. Option C
Answer: C
NEW QUESTION # 159
......
Cisco 350-601 certification exam is an essential requirement for professionals who wish to advance their careers in the data center industry. Implementing Cisco Data Center Core Technologies (350-601 DCCOR) certification is recognized globally and is highly valued by employers. Implementing Cisco Data Center Core Technologies (350-601 DCCOR) certification demonstrates the candidate's skills and knowledge in implementing and managing complex data center solutions, making them highly sought after by organizations looking to hire data center professionals.
Skills Outline of Cisco 350-601 Exam
The Cisco 350-601 exam is presented to the candidates in a wide range of topics, which indicate the skills measured. Here they are:
- Compute (25%)
Answering the questions from this objective, the applicants have to show that they have the capability to implement Cisco Unified Compute System Rack Servers, implement infrastructure monitoring such as Intersight and SPAN, implement compute management configuration (restore and backup), describe software and firmware updates and their effects on C-Series and B-Series servers, and explain HyperFlex Infrastructure with its benefits (all-flash vs Edge and Hybrid Architecture). Besides, within this knowledge area, the learners’ ability to implement Cisco Compute System Blade Chassis is tested. This means that the students must have the skills needed to accomplish initial setup and infrastructure management. They should also demonstrate their knowledge of server management, storage management, and network management (pools and policies, VLANs, templates, QoS).
- Network (25%)
To answer the questions from this first topic, the test takers need to demonstrate that they have the skills and knowledge required to apply routing protocols (FHRP, PIM, MP-BGP, OSPFv2, OSPFv3), implement network configuration management, and implement infrastructure monitoring such as SPAN and NetFlow. This domain also comprises of skills such as describing software updates and their impacts, which means that the students should understand fabric setup, VMM, tenant policies, and access policies. Also, they will be required to answer the questions related to analyzing Cloud deployment and service models, analyzing packet flow (broadcast, multicast, and unicast), applying overlay protocols such as OTV and VXLAN EVPN, and applying switching protocols, for example, vPC, LACP, and RSTP+.
- Automation (15%)
In the framework of this topic, the individuals need to show their competency in implementing automation and scripting tools, including REST API, EEM, Scheduler, Guest Shell and Bash Shell for NX-OS, and JSON and XML encodings. Answering the questions within this domain, they also need to be able to evaluate automation as well as orchestration technologies. This means that they should be well conversant with UCSD, DCNM, POAD, PowerShell, Python, Ansible, and Puppet.
- Storage Network (20%)
This subject area evaluates the candidates’ proficiency in describing software updates as well as their impacts (EPLD and disruptive/nondisruptive), implementing infrastructure monitoring, describing the NAS and NFS concepts, and implementing FCoE Unified Fabric (DCB and FIP). This topic also encompasses their proficiency in implementing Fiber Chanel. This means that the applicants must have a thorough understanding of zoning, VSAN, NPV and NPIV, device alias, FCNS, CFS, FCID, port channels, and switch fabric initialization.
- Security (15%)
In the last section, the examinees need to demonstrate their expertise in applying network security, including CoPP, ACI contracts, and micro-segmentation, AAA and RBAC, and first-hope security features, such as port security, DHCP snooping, and dynamic ARP inspection. In addition, the candidates will need to show that they can apply to compute security effectively. Last but not least, they will have to answer the questions related to the application of storage security in reference to AAA and RBAC, fabric binding, and port security.
Updated 350-601 Certification Exam Sample Questions: https://prep4sure.real4dumps.com/350-601-prep4sure-exam.html
