View All JN0-363 Actual Exam Questions Answers and Explanations for Free May-2023
The Most In-Demand Juniper JN0-363 Pass Guaranteed Quiz
NEW QUESTION # 54
Click the Exhibit button.
Referring to the exhibit, how many milliseconds must pass before the interface ge-0/0/1.0 is considered down?
- A. 900 ms
- B. 1600 ms
- C. 2400 ms
- D. 1200 ms
Answer: D
NEW QUESTION # 55
Which two statements reflect benefits of performing per-flow load balancing over per-packet load balancing? (Choose two.)
- A. Packets arrive at the destination in the order they were sent.
- B. All physical links in the network are used equally.
- C. Provides easier implementation of class of service policies.
- D. Allows the destination host to re-order packets and increase performance.
Answer: A,C
NEW QUESTION # 56
Click the Exhibit button.
In the network shown in the exhibit, all switches are configured with the default STP root bridge priority, and Switch A has been selected as root. You recently added the older Switch D into the network as an access switch, and notice it has taken over as root.
Which configuration would solve this problem?
- A.
- B.
- C.
- D.
Answer: D
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/reference/configuration-statement/no-root-port-edit-protocols-stp.html
NEW QUESTION # 57
By default, which RSVP reservation style is used by the Junos OS?
- A. fixed explicit
- B. shared explicit
- C. fixed filter
- D. wildcard filter
Answer: C
NEW QUESTION # 58
Click the Exhibit button. The policy shown in the exhibit has been configured and installed on your router.
What is the result of applying this policy?
- A. The 172.18.1.0/32 network will be redistributed into OSPF as an external route.
- B. The 172.18.1.0/24 network will be redistributed into OSPF as an external route.
- C. The 172.18.1.0/24 network will be redistributed into OSPF as an internal route.
- D. The 172.18.1.0/32 network will be redistributed into OSPF as an internal route.
Answer: B
NEW QUESTION # 59
Exhibit
You have an established LSP between your R1 and R5 devices using the configuration shown in the exhibit. You are asked to ensure that MPLS labels are used to forward traffic by all devices within the LSP.
Which action will accomplish this behavior?
- A. Configure the explicit-null statement under the protocol mpls hierarchy on R1.
- B. Configure the install statement under the R1_TO_R5 label switched path on R1.
- C. Delete the no-espf statement under the R1_TO_R5 label switched path on R1.
- D. Configure the ultimace-hop-popping statement under the R1_TO_R5 label switched path on R1.
Answer: B
NEW QUESTION # 60
Click the Exhibit.
Referring to the exhibit, which statement is correct about MVRP?
- A. AS1 is not allowing ES2 access to VLAN 300.
- B. ES2 is not interested in VLAN 300.
- C. AS1's VLAN ID list is missing an entry for VLAN 300.
- D. ES1 is not advertising VLAN 300 to AS1.
Answer: B
NEW QUESTION # 61
Click the Exhibit button.
Referring to the exhibit what are two reasons for the configuration stanza? (Choose two.)
- A. to mark the tunnel up after the hold-time expires
- B. to reduce the risk of forwarding traffic through a stateless tunnel
- C. to remove the tunnel interface from inet.0 after the hold-time expires
- D. to mark the tunnel down after the hold-time expires
Answer: B,D
NEW QUESTION # 62
Click the Exhibit button.
Referring to the exhibit, which statement about the IS-IS interface is true?
- A. The ge-0/0/0.0 interface will act as an L1/L2 interface
- B. The ge-0/0/0.0 interface will not be assigned to a level
- C. The ge-0/0/0.0 interface will act as an L2 interface only
- D. The ge-0/0/0.0 interface will act as an L1 interface only
Answer: A
NEW QUESTION # 63
Which type of router can provide connectivity between areas in an IS-IS domain?
- A. an area border router with adjacencies in more than one area
- B. a Level 2 router with adjacencies in a single area
- C. a Level 1 router with adjacencies within a single area
- D. a Level 2 router with adjacencies in more than one area
Answer: D
NEW QUESTION # 64
Click the Exhibit button. From the output shown in the exhibit, what would happen to a packet destined for address 172.29.3.5?
- A. The address is not in the aggregate range; the packet will be forwarded.
- B. The address is in the aggregate range; the packet will be dropped.
- C. The address is not in the aggregate range; the packet is sent to the Routing Engine.
- D. The address is in the aggregate range; the packet will be silently dropped.
Answer: B
NEW QUESTION # 65
You must configure an MX Series device to receive and forward a mixture of single-tag and dual-tag frames on interface xe-0/0/0.
In this scenario what will accomplish goal?
- A. xe-0/0/0 {vlan-tagging;}
- B. xe-0/0/0 {stacked-vlan-tagging;}
- C. xe-0/0/0 {vlan-vci-tagging;}
- D. xe-0/0/0 {flexible-vlan-tagging;}
Answer: D
NEW QUESTION # 66
Click the Exhibit.
Referring to the exhibit, which IS-IS router will be selected as the DIS?
- A. Router 4
- B. Router 3
- C. Router 2
- D. Router 1
Answer: A
NEW QUESTION # 67
Click the Exhibit.
Referring to the configuration in the exhibit, which two statements are true? (Choose two.)
- A. The next-hop 172.16.1.2 must be directly connected to the router for route
- B. The next-hop 172.16.1.2 must be part of an active route in route table inet 0 for route 192.168.5.0/24 to be active.
- C. The next-hop 172.16.1.2 must respond to ping commands for the route 192.168.5.0/24 to be active.
- D. The next-hop 172.16.1.2 must be active in route table inet 3 for the route 192.168.5.0/24 to be active.
Answer: A,B
NEW QUESTION # 68
When working with an MPLS LSP, what will the install 172.16.6.0/24 active command accomplish?
- A. The command will swap the prefix from inet.0 to inet.3
- B. The command will swap the prefix from inet.3 to inet.0
- C. The command will install the prefix in inet.0 rather than inet.3
- D. The command will install the prefix in inet.3 rather than inet.0
Answer: D
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/lsp-routes.html#id-21214
NEW QUESTION # 69
Which statement describes integrated routing and bridging (IRB) interfaces?
- A. An IRB interface enables Layer 2 switching on the router.
- B. An IRB interface defines a bridge domain.
- C. An IRB interface assigns interfaces to VLANs.
- D. An IRB interface Is an IP gateway For hosts of a bridge domain.
Answer: A
NEW QUESTION # 70
Click the Exhibit button.
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. The router will install the 0.0.0.0/0 route into the routing table when no BGP prefixes are present
- B. The router will remove the 0.0.0.0/0 route from the routing table when any BGP prefixes are present
- C. The router will remove the 0.0.0.0/0 route from the routing table when no BGP prefixes are present
- D. The router will install the 0.0.0.0/0 route into the routing table when any BGP prefixes are present
Answer: C,D
NEW QUESTION # 71
Click the Exhibit.
You are receiving the same route prefix from four EBGP neighbors.
Based on the information provided in the exhibit, which route will become active?
- A. Route1
- B. Route3
- C. Route4
- D. Route2
Answer: A
NEW QUESTION # 72
To prevent fragmentation issues across a GRE tunnel, which MTU value is recommended for the tunnel to accommodate most IP packets?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 73
Exhibit
You are asked to configure the OSPF environment to prevent the DRother routers from participating in DR/BDR election.
Referring to the exhibit, which command will accomplish this task?
- A. set protocols ospf area 0.0.0.0 interface ge-0/0/1 interface-type nbma
- B. set protocols ospf area 0.0.0.0 interface ge-0/0/1 interface-type p2p
- C. set protocols ospf area 0.0.0.0 interface ge-0/0/l priority 255
- D. set protocols ospf area 0.0.0.0 interface ge-0/0/1 priority 0
Answer: C
NEW QUESTION # 74
What are two bridging concepts that are used to maintain an Ethernet switching table? (Choose two.)
- A. learning
- B. timing
- C. exporting
- D. aging
Answer: A
NEW QUESTION # 75
Click the Exhibit button. In the exhibit, three IPv6 addresses are listed. Which two statements are true? (Choose two.)
- A. The first address is complete and correct.
- B. The third address is not formatted correctly.
- C. All three addresses are the same.
- D. The second address is incomplete and not correct.
Answer: A,C
NEW QUESTION # 76
Which BGP attribute Is used to detect touting loops?
- A. AS path
- B. local preference
- C. MED
- D. next hop
Answer: A
NEW QUESTION # 77
Referring to the exhibit, which two statements are correct? (Choose two.)
ISP A AS 65501
ISP B AS 65502
Advertised Prefixes: 172.20.0.0/24 172.20.20.0/24 172.20.21.0/24
Advertised Prefixes: 172.20.0.0/24 172.20.1.0/24
- A. Devices in AS 65512 will prefer ISP A for traffic destined to the 172.20.21.0/24 network.
- B. Devices In AS 65512 will prefer ISP B for traffic destined to the 172.20.0.0/24 network.
- C. Devices In AS 65512 will prefer ISP A for traffic destined to the 172.20.0.0/24 network.
- D. Devices in AS 65512 will prefer ISP B for traffic destined to the 172.20.21.0/24 network.
Answer: D
NEW QUESTION # 78
You are asked to create connections between routing instances on the same Junos device and route between the connected Instances. What are two ways to accomplish this task? (Choose two.)
- A. Use physical interfaces.
- B. Use an IRB interface.
- C. Use loopback interfaces.
- D. Use logical tunnel interfaces.
Answer: A,B
NEW QUESTION # 79
......
The Juniper JN0-363 certification exam is an advanced-level certification that demonstrates a deep understanding of service provider routing and switching technologies. This certification is ideal for individuals who are looking to advance their careers in the service provider industry and want to demonstrate their expertise in Juniper Networks technologies and products.
JN0-363 Free Certification Exam Material with 265 Q&As : https://prep4sure.real4dumps.com/JN0-363-prep4sure-exam.html
