Released SAP E_S4HCON2022 Updated Questions PDF
E_S4HCON2022 Dumps and Practice Test (75 Exam Questions)
NEW QUESTION # 26
Which step can be optimized when you provide the MIGRATE_DT_DUR.XML file to SUM?
- A. Shadow on target creation
- B. Downtime migration
- C. Downtime conversion
- D. Silent data migration (SDM)
Answer: B
NEW QUESTION # 27
You want to execute a Unicode Conversion only. Which approach do you need to follow?
Please choose the correct answer.
Response:
- A. SWPM using the Load procedure
- B. SUM with DMO
- C. SWPM using the Backup / Restore procedure
- D. SUM without DMO
Answer: A
NEW QUESTION # 28
You want to perform custom code check via ABAP test cockpit in preparation of your SAP S/4HANA conversion? What kind of SAP System can you use to generate the custom code migration worklist?
- A. A Standalone SAP system with ABAP 7.51 or above
- B. AA
- C. An SAP S4HANA 1709 sandbox system
Answer: A,C
NEW QUESTION # 29
What is the benefit of using the file UPGANA.XML from a previous SUM run?
Please choose the correct answer.
Response:
- A. To make the progress information within SUM UI more accurate
- B. To skip selected phases during the SUM run
- C. To repeat specific phases during the SUM run
- D. To auto-fill specific fields on selected screens on the SUM UI
Answer: A
NEW QUESTION # 30
What is the minimum SAP_BASIS release of an SAP ECC system that can be converted to an SAP S/4HANA Server?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 31
You are planning to use DMO of SUM to perform an "inplace-migration" to SAP HANA.
What do you need to consider? Note: there are 2 correct answers to this question.
- A. The target database size increases temporarily because of the Shadow Repository.
- B. SAP HANA Landscape Reorganization required a manual step to edit a file.
- C. The source system is non-Unicode and the target database is a scale-out system.
- D. Network capacity between exporting and importing R3load processes must be.
- E. Unicode conversion is part of DMO only in case of target version AS ABAP 7.40 or 7.31.
Answer: B,E
NEW QUESTION # 32
What is the different between the benchmaking and the repetition option of the Database Migration Option (DMO) of SUM?
- A. The benchmaking option allows you to migration a specified set of tables
- B. The benchmaking option allows you to repeat the uptime migration
- C. The repetition option allows you to run the migration without a shadow system
- D. The repetition option allows you to repeat the complete migration
Answer: A
NEW QUESTION # 33
You are performing an SAP S/4HANA conversion for your production system. This conversion requires that certain business functions are switched on.
Following SAP recommendations, how will you achieve this?
There are 2 correct answers to this question.
Response:
- A. During conversion, SUM delivers some business functions already activated.
- B. Import a transport request from the development system that contains the recording of the activation.
- C. Specify the business functions that need to be switched on during the prepare part of SUM.
- D. Activate the required business functions manually in the production system.
Answer: A,B
NEW QUESTION # 34
Regarding an SAP Upgrade, What does the major SAP Note for the version of SUM you are using usually contain?
- A. AA
- B. The corrections to the SUM Guide
- C. An overview about possible upgrade paths
- D. The link to different patch levels to SUM
Answer: B,C,D
NEW QUESTION # 35
What do you need to know about the SAP S/4HANA Conversion Guide? Note: There are 2 correct answers to this question.
- A. It explains where to find information about the custom code analysis.
- B. It explains the database migration option (DMO) of SUM.
- C. It is a database-specific document.
- D. It contains a section about the simplification item (SI) checks.
Answer: A,D
NEW QUESTION # 36
You are performing an S/4HANA conversion of the development system. Which credentials do you use in which system to perform the adjustment of dictionary objects (SPDD)?
Please choose the correct answer.
Response:
- A. Credentials of user DDIC in client 000 of the shadow system
- B. Credentials of a named user in client 000 of the shadow system
- C. Credentials of a named user in the development client of the development system
- D. Credentials of user DDIC in the development client of the development system
Answer: B
NEW QUESTION # 37
When using the DMO of SUM, which files can be handled by SUM in the download directory?
There are 2 correct answers to this question.
Response:
- A. Parameter file SAPup_add.par
- B. Breakpoint configuration file SAPUPPHAS.BRK
- C. MIGRATE J5T_DUR_XML file from a previous run
- D. Stack XML file calculated by the Maintenance Planner
Answer: C,D
NEW QUESTION # 38
In which part of an upgrade does SUM allow you to generate ABAP loads (SGEN)?
There are 2 correct answers to this question.
- A. Post-downtime
- B. During downtime
- C. During uptime
- D. During SPDD
Answer: A,C
NEW QUESTION # 39
You have chosen the "Advanced" option during the main configuration of the SUM tool. Which steps take place via the shadow instance?
There are 2 correct answers to this question.
Response:
- A. Activation of dictionary objects (ACT_UPG)
- B. Conversion of application tables (PARCONVJJPG)
- C. Switch to new repository (EU_SWITCH)
- D. Modification adjustment (SPDD)
Answer: A,D
NEW QUESTION # 40
You are performing an SAP S/4HANA conversion of the development system. Which credentials do you use in which system to perform the adjustment of programs and other non-dictionary repository objects (SPAU)?
Please choose the correct answer.
- A. Credentials of user DDIC in client 000 of the shadow system
- B. Credentials of a named user in client 000 of the shadow system
- C. Credentials of a named user in the development client of the development system
- D. Credentials of user DDIC in the development client of the development system
Answer: C
NEW QUESTION # 41
The SUM procedure stops with an error during uptime. How can you identify the current phase, the one in which SUM encountered an error?
There are 2 correct answers to this question.
Response:
- A. Check the system log (transaction SM21) of the SAP system
- B. Check the messages shown by the SUM UI
- C. Check the most recent entries in SAPup.log
- D. Check the most recent entries shown in file sapevt.trc
Answer: B,C
NEW QUESTION # 42
Which circumstances will allow SUM to run without the creation of a shadow system?
Please choose the correct answer.
Response:
- A. Using the main configuration option "Single System" in case of an upgrade.
- B. Using the main configuration option "Standard" when applying SAP Support Packages
- C. Using the main configuration option "Single System" when installing an Add-On
- D. Using the database migration option (DMO) for SUM
Answer: C
NEW QUESTION # 43
Which are valid options to check the progress of the database migration in a Microsoft Windows environment?
There is correct answers to this question.
Response:
- A. Check the "Charts Control Center" in the SUM UI
- B. Check the dump size of the database export on disk
- C. Check logs for jobs starting with "RSUPG_SGEN" in the system
- D. Check the log files written under "SUM\abap\log"
Answer: A,D
NEW QUESTION # 44
In which scenarios do you need to use SUM 2.0 instead of SUM 1.0?
There are 2 correct answers to this question.
Response:
- A. Using DMO when applying Support Packages to SAP ECC 6.07
- B. Updating to SAP ECC 6.07 using DMO
- C. Upgrading to SAP ECC 6.08 without using DMO
- D. SAP S/4HANA conversion to SAP S/4HANA 1709
Answer: C,D
NEW QUESTION # 45
Which steps can SUM perform during an SAP S/4HANA conversion? Note; There are 2 correct answers to this question.
- A. Software update
- B. Custom code analysis
- C. Database migration
- D. Unicode conversion
Answer: A,C
NEW QUESTION # 46
You are planning to use DMO of SUM to perform an "inplace-migration" to SAP HANA. What do you need to consider? Note: there are 2 correct answers to this question.
- A. The target database size increases temporarily because of the Shadow Repository.
- B. SAP HANA Landscape Reorganization required a manual step to edit a file.
- C. The source system is non-Unicode and the target database is a scale-out system.
- D. Network capacity between exporting and importing R3load processes must be.
- E. Unicode conversion is part of DMO only in case of target version AS ABAP 7.40 or 7.31.
Answer: B,E
NEW QUESTION # 47
You are running an SAP ECC system. For which of the following activities does SUM allow you to use the Near Zero Downtime Maintenance (NZDM) capabilities?
There are 3 correct answers to this question.
Response:
- A. Apply an Enhancement Package.
- B. Perform an SAP S/4HANA conversion including DMO.
- C. Use DMO for SUM.
- D. Upgrade the SAP system.
- E. Apply SAP Support Packages.
Answer: A,D,E
NEW QUESTION # 48
Which downtime optimization technique requires the minimized downtime service (MDS) from SAP?
- A. Downtime Optimized DMO (DoDMO)
- B. Downtime Optimized Data Conversion (DoC)
- C. Near-Zero Downtime Maintenance (nZDM)
- D. Near-Zero Downtime Technology (NZDT)
Answer: D
NEW QUESTION # 49
You are performing an inplace SAP S/4HANA conversion including DMO. What is the latest point in time when you can reset the procedure without losing data?
- A. The end of the database migration
- B. The end of the business downtime
- C. The start of the Execution roadmap step
- D. The start of the business downtime
Answer: B
NEW QUESTION # 50
During the SUM procedure, the phase XPRAS_AIMMRG fails. Where can you most likely see the reason for the error?
There are 2 correct answers to this question.
Response:
- A. In the latest log files in the SUM directory, subdirectory ABAP, subdirectory log
- B. In the corresponding R3trans log files of this phase
- C. In the latest log files in the SUM directory, subdirectory ABAP, subdirectory tmp
- D. In the job log for the corresponding job in SM37 (Job Overview)
Answer: A,D
NEW QUESTION # 51
......
E_S4HCON2022 Exam Dumps Pass with Updated 2023 Certified Exam Questions: https://prep4sure.real4dumps.com/E_S4HCON2022-prep4sure-exam.html
