Pass Essentials Exam in First Attempt Guaranteed 100% Cover Real Exam Questions [Oct-2023]
Valid Essentials test answers & WatchGuard Essentials exam pdf
WatchGuard Essentials certification is a vital certification for individuals who want to pursue a career in network security. Fireware Essentials Exam certification is designed to validate the skills and knowledge required to install, configure, and manage WatchGuard firewall products. Fireware Essentials Exam certification is highly valued in the industry, and it is a requirement for some job positions.
NEW QUESTION # 31
You can use Firebox-DB authentication with any type of Mobile VPN.
- A. False
- B. True
Answer: A
NEW QUESTION # 32
Which authentication servers can you use with your Firebox? (Select four.)
- A. Linux Authentication
- B. Active Directory
- C. LDAP
- D. Kerberos
- E. TACACS+
- F. RADIUS
- G. Firebox databases
Answer: B,C,F,G
Explanation:
NEW QUESTION # 33
Which of these services would you use to allow the use of P2P programs for a specific department in your organization? (Select one.)
- A. Data Loss Prevention
- B. Reputation Enabled Defense
- C. Application Control
- D. IPS
Answer: C
NEW QUESTION # 34
Only 50 clients on the trusted network of your Firebox can connect to the Internet at the same time. What could cause this? (Select one.)
- A. The DHCP address pool on the trusted interface has only 50 IP addresses.
- B. TheLiveSecurity feature key is expired.
- C. The device feature key allows a maximum of 50 client connections.
- D. The Outgoing policy allows a maximum of 50 client connections.
Answer: A
NEW QUESTION # 35
Which policies can use the Intrusion Prevention Service to block network attacks? (Select one?)
- A. Only packet filter policies
- B. Only proxy policies
- C. Only HTTP and HTTPS Proxy policies
- D. Only inbound policies
- E. All policies
Answer: E
NEW QUESTION # 36
You can configure your Firebox to send log messages to how many WatchGuard Log Servers at the same time? (Select one.)
- A. Two
- B. As many as you have configured on your network.
- C. One
Answer: B
Explanation:
http://www.watchguard.com/help/docs/wsm/xtm_11/en-us/content/en-us/logging/logging_and_logfiles_about_c.html
NEW QUESTION # 37
Which tool can add an IP address for the Firebox to permanently block? (Select one)
- A. Firebox System Manager - Subscription services
- B. FireBox System Manager - Blocked Sites list
- C. FireWatch
- D. Traffic Monitor
- E. Firebox System Manager - Authentication list
- F. Log Server
Answer: B
Explanation:
Explanation/Reference:
Block a site permanently
The Successful Company network administrator has been driven to distraction recently by a script kiddy using addresses in the 192.136.15.0/24 network to run probes of the Successful network. In this exercise, we permanently block all connections from that network.
1. From Policy Manager, select Setup > Default Threat Protection > Blocked Sites.
The Blocked Sites Configuration dialog box opens.
2. On the Blocked Sites tab, click Add.
3. The Add Site dialog box opens. 3. Use the Choose Type drop-down list to select Network IP. In the Value text box, type 192.136.15.0/ 24.
4. Click OK.
The entry appears in the Blocked Sites list. With this configuration, the Firebox blocks all packets to and from the 192.136.15.0/24 network range.
Reference: Fireware Basics, Courseware: WatchGuard System Manager 10, pages 15, 34, 59, 181
NEW QUESTION # 38
Match the monitoring tool to the correct task.
Which tool can view a list of users connected to the Firebox? (Select one)
- A. Firebox System Manager - Subscription services
- B. FireWatch
- C. Traffic Monitor
- D. Log Server
- E. FireBox System Manager - Blocked Sites list
- F. Firebox System Manager - Authentication list
Answer: F
Explanation:
You can viewa list of users connected to the Firebox through HostWatch, and you can also use Authentication List, which identifiesthe IP addresses and user names of all the users that are authenticated to the Firebox.
Reference: Fireware Basics, Courseware: WatchGuard System Manager 10, pages 15, 34, 59, 181
NEW QUESTION # 39
From the SMTP proxy action settings in this image, which of these options is configured for outgoing SMTP traffic? (Select one.)
- A. Prevent mail relay for the example.comdomain.
- B. Rewrite the Mail From header for the example.comdomain.
- C. Deny outgoing mail from the example.comdomain.
- D. Deny incoming mail from the example.comdomain.
Answer: D
NEW QUESTION # 40
From the Firebox System Manager >Authentication List tab, you can view all of the authenticated users connected to your Firebox and disconnect any of them.
- A. True
- B. False
Answer: A
Explanation:
http://www.watchguard.com/help/docs/wsm/xtm_11/en-us/content/en-us/fsm/authentic_users_wsm.html
NEW QUESTION # 41
The policies in a default Firebox configuration do not allow outgoing traffic from optional interfaces.
- A. False
- B. True
Answer: A
NEW QUESTION # 42
Your company denies downloads of executable files from all websites. What can you do to allow users on the network to download executable files from the company's remote website? (Select one.)
- A. Add an HTTP proxy exception for the company's remote website.
- B. Create an IPS exception.
- C. Configure HTTP Request > URL Paths to allow the company's remote website.
- D. Create a Blocked Sites exception.
- E. Create a WebBlocker exception to allow access to the company's remote website.
Answer: A
NEW QUESTION # 43
If you disable the Outgoing policy, which policies must you add to allow trusted users to connect to commonly used websites? (Select three.)
- A. FTP port 21
- B. DNS port 53
- C. NAT policy
- D. HTTP port 80
- E. HTTPS port 443
Answer: B,D,E
Explanation:
Explanation/Reference:
TCP-UDP packet filter
If you decide to remove the Outgoing policy, you must add a policy for any type of traffic you want to allow through the Firebox. If you remove the Outgoing policy and then decide you want to allow all TCP and UDP connections through the Firebox again, you must add the TCP-UDP packet filter to provide the same function. This is because the Outgoing policy does not appear in the list of standard policies available from Policy Manager.
Reference: Fireware Basics, Courseware: WatchGuard System Manager 10, page 97
NEW QUESTION # 44
You configured four Device Administrator user accounts for your Firebox. To see a report of witch Device Management users have made changes to the device configuration, what must you do? (Select two.)
- A. Start Firebox System Manager for the device and review the activity for the Management Users on the Authentication List tab.
- B. Configure your device to send audit trail log messages to your WatchGuard Log Server or Dimension Log Server.
- C. Connect to Report Manager or Dimension and view the Audit Trail report for your device.
- D. Open WatchGuard Server Center and review the configuration history for managed devices.
Answer: C,D
NEW QUESTION # 45
How can you include log messages from more than one Firebox in a single report generated by Dimension? (Select two.)
- A. Export report data as a single PDF file for all the devices you want to include in the report.
- B. You cannot see report data in Dimension for more than one device.
- C. Create a report schedule that includes all the devices you want to include in the report.
- D. Create a device group and view the reports for that group.
Answer: C,D
NEW QUESTION # 46
HOTSPOT
Match each WatchGuard Subscription Service with its function:
Answer:
Explanation:
Explanation:
WebBlocker
Spam Blocker Gateway / Antivirus APT Blocker Application Control Quarantee Server Intrusion Prevention Server IPS Data Loss Prvention DLP Reputation Enable Defense RED
NEW QUESTION # 47
Which of these actions adds a host to the temporary or permanent blocked sites list? (Select three.)
- A. Add the site to the Blocked Sites Exceptions list.
- B. Enable the AUTO-block sites that attempt to connect option in a deny policy.
- C. On the Firebox System Manager >Blocked Sites tab, select Add.
- D. In Policy Manager, select Setup> Default Threat Protection > Blocked Sites and click Add.
Answer: B,C,D
NEW QUESTION # 48
Which WatchGuard Subscription Service must be enabled in a proxy policy before you can use APT Blocker? (Select one.)
- A. Application Control
- B. Gateway Antivirus
- C. IPS
- D. WebBlocker
- E. RED
Answer: B
NEW QUESTION # 49
Match each WatchGuard Subscription Service with its function.
Uses full-system emulation analysis to identify characteristics and behavior of zero-day malware. (Choose one).
- A. Reputation Enable Defense RED
- B. Application Control
- C. Quarantine Server
- D. WebBlocker
- E. Spam Blocker
- F. Gateway / Antivirus
- G. APT Blocker
- H. Intrusion Prevention Server IPS
- I. Data Loss Prevention DLP
Answer: G
Explanation:
Explanation/Reference:
APT Blocker is intended to stop malware and zero-day threats that are trying to invade an organization's network.
APT Blocker uses a next-gen sandbox to get detailed views into the execution of a malware program. After first running through other security services, files are fingerprinted and checked against an existing database - first on the appliance and then in the cloud. If the file has never been seen before, it is analyzed using the system emulator, which monitors the execution of all instructions. It can spot the evasion techniques that other sandboxes miss.
Reference: http://www.watchguard.com/wgrd-products/security-modules/apt-blocker
NEW QUESTION # 50
Which WatchGuard Subscription Service must be enabled in a proxy policy before you can use APT Blocker? (Select one.)
- A. Application Control
- B. Gateway Antivirus
- C. IPS
- D. WebBlocker
- E. RED
Answer: B
NEW QUESTION # 51
Which tool can add an IP address for the Firebox to permanently block? (Select one)
- A. Firebox System Manager - Subscription services
- B. FireBox System Manager - Blocked Sites list
- C. FireWatch
- D. Traffic Monitor
- E. Firebox System Manager - Authentication list
- F. Log Server
Answer: B
Explanation:
Block a site permanently
The Successful Company networkadministrator has been driven to distraction recently by a script kiddy using addresses in the 192.136.15.0/24 network to run probes of the Successful network. In this exercise, we permanently block all connections from that network.
1.From PolicyManager, select Setup > Default Threat Protection > Blocked Sites. The Blocked Sites Configuration dialog box opens.
2.On the Blocked Sites tab, click Add.
3.The Add Site dialog box opens. 3. Use the Choose Type drop-down list to select Network IP. In the Value text box, type 192.136.15.0/ 24.
4. Click OK.
The entry appears in the Blocked Sites list. With this configuration, the Firebox blocks all packets to and from the 192.136.15.0/24 network range.
Reference: Fireware Basics, Courseware: WatchGuard System Manager 10, pages 15, 34, 59, 181
NEW QUESTION # 52
Match the monitoring tool to the correct task.
Which tool can ping the source of a denied packet? (Select one)
- A. Firebox System Manager - Subscription services
- B. FireWatch
- C. Traffic Monitor
- D. Firebox System Manager - Authentication list
- E. Log Server
- F. FireBox System Manager - Blocked Sites list
Answer: C
Explanation:
Explanation/Reference:
For a quick look at the log messages generated by the Firebox, use Traffic Monitor. With Traffic Monitor, you can apply color to different types of messages, and ping or traceroute to the IP addresses of computers included in the log messages.
Reference: Fireware Basics, Courseware: WatchGuard System Manager 10, pages 15, 34, 59, 181
NEW QUESTION # 53
When your device is in a default state, to which interface do you connect your management computer so you can use the Quick Setup Wizard or Web Setup Wizard to configure the device? (Select one.)
- A. Interface 1
- B. Interface 0
- C. Any interface
- D. Console interface
Answer: A
Explanation:
To start the Web Setup Wizard, connect your computer to interface number 1 of your XTMdevice with an Ethernet cable. This is the trusted interface.
Reference:http://www.watchguard.com/help/docs/wsm/xtm_11/en-US/index.html#en-US/installation/qsw_web_about_c.html
NEW QUESTION # 54
In the default Firebox configuration file, which policies control management access to the device? (Select two.)
- A. WatchGuard Web UI
- B. Ping
- C. WatchGuard
- D. FTP
- E. Outgoing
Answer: A,C
NEW QUESTION # 55
......
WatchGuard Essentials (Fireware Essentials) Certification Exam is a comprehensive certification program designed for network security professionals who want to demonstrate their expertise in the field of network security. Fireware Essentials Exam certification program is vendor-neutral and recognized by organizations around the world. Fireware Essentials Exam certification exam is designed to test the candidate's knowledge and skills in areas such as network security, firewalls, VPNs, and other security technologies. Passing the exam demonstrates the candidate's expertise in the WatchGuard Fireware Essentials platform and increases their career opportunities in the field of network security.
Essentials Exam Questions – Valid Essentials Dumps Pdf: https://prep4sure.real4dumps.com/Essentials-prep4sure-exam.html
