Best Quality Cisco 500-920 Exam Questions Real4dumps Realistic Practice Exams [2021]
Critical Information To Cisco Data Center Unified Computing Infrastructure Troubleshooting Pass the First Time
Cisco 500-920 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION 22
Which Cisco UCS internal component maintains the UCS XML database, manages the FSM stages and operations and instructs the Application Gateway to perform operations on physical and logical elements?
- A. Cisco Application Gateways
- B. Cisco Data Management Engine
- C. Cisco Finite State Machine
- D. Cisco UCS Manager
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/System-Monitoring/3-1/b_UCSM_GUI_System_Monitoring_Guide_3_1/b_UCSM_GUI_System_Monitoring_Guide_3_1_chapter_0100.html
NEW QUESTION 23
When server is booting from SAN, which command verifies the PLOGI sessions with the target?
- A. FCIist
- B. Lunlist
- C. FCMap
- D. Lunmap
Answer: B
NEW QUESTION 24
Which statement is true regarding the UCS Manager GUI is showing "Overall Status Unassociated" in the General tab for a C-series server?
- A. The server is not properly connected
- B. The server has a service profile assigned, but has connectivity issues with UCS Manager
- C. The server has been properly connected, but has not been discovered by UCS Manager
- D. The server does not have a service profile assigned, but has been discovered by UCS Manager
Answer: A
NEW QUESTION 25
Which two statements describes connecting the IO Modules in the UCS chassis to the Fabric interconnects? (Choose two )
- A. Connect Fl-B to the IOM B of each chassis
- B. Connect Fl-A to IOM A and IOM B in each chassis
- C. Connect Fl-B to the IOM A of each chassis
- D. Connect Fl-A to the IOM A of each chassis
- E. Connect Fl-B to IOM A and IOM B in each chassis
- F. Connect Fl-A to the IOM B of each chassis
Answer: A,D,F
NEW QUESTION 26
When troubleshooting, which option is the primary uses of the SCOPE command?
- A. The SCOPE command is not helpful in this case
- B. To access the log files on the virtual machines
- C. To access the log files that reside in a component
- D. To access the log files on the log server
Answer: C
NEW QUESTION 27
An overvoltage condition has occurred on a UCS server However the Cisco IMC System Event Log (SEL) file is full What is the resulting fault logging action?
- A. The overvoltage condition event will not be recorded in the SEL.
- B. The newest entry in the SEL will be overwritten by the overvoltage condition event.
- C. The SEL is not used to record server related events, such as overvoltage conditions.
- D. The oldest entry in the SEL will be overwritten by the overvoltage condition event
Answer: A
NEW QUESTION 28
In Cisco UCS, there are several interfaces involved on the packet path from the vNIC through the adapter, IOM to finally reach Pi Which is the order of those interfaces, starting from the vNIC?
- A. HIF. SIF, VIF, UIF NIF
- B. VIF, UIF, HIF, NIF SIF
- C. HIF. NIF, UIF, VIF SIF
- D. VIF, UIF, HIF, SIR NIF
Answer: D
NEW QUESTION 29
In a Cisco UCS Manager, if all KVM sessions to each server fail to start, what is likely causing the problem?
- A. The workstation you are using to connect to the KVM session is the problem
- B. The Fabric Interconnect to which you are connected has a problem
- C. The I/O Modules in the chassis are the problem
- D. Cisco UCS Manager has a problem
Answer: A
NEW QUESTION 30
What is the next step after performing a UCS firmware upgrade, and downloading the latest drivers both for your RAID Controller and your Fibre Channel HBA?
Check the HCL
- A. No Drivers are needed in a UCS environment
- B. No need to do anything Drivers are automatically installed for you
- C. Apply the device driver update to the devices
- D. Test device driver compatibility
Answer: D
NEW QUESTION 31
When configuring UCS SAN Connectivity to a 3rd Party FibreChannel Storage Array that is connecting directly to the UCS Fabric Interconnects, which option is Cisco recommended'?
- A. Connect the Storage Array to a FC Storage Port and Enable Switching Mode on the UCS Fabric Interconnects
- B. Connect the Storage Array to an Appliance Port and Enable Switching Mode on the UCS Fabric Interconnects
- C. Direct connectivity between UCS Fabric Interconnects and FibreChannel Storage Arrays is not supported
- D. Connect the Storage Array to a RC Storage Port and Enable NPV Mode on the UCS Fabric Interconnects
- E. Connect the Storage Array to an Appliance Port and Enable NPV Mode on the UCS Fabric Interconnects
Answer: A
NEW QUESTION 32
Which statement is true when using SPAN for Fibre Channel (FC) Traffic?
- A. FC port on Cisco UCS 6238UP can be used as a SPAN source
- B. When defining FC uplink port as the SPAN destination, system will automatically stop using that port as an uplink port
- C. Any port can be used as a SPAN destination port Even if it is defined as Eth uplink port it will be automatically converted to FC uplink port
- D. For FC SPAN sessions we do not have to specifically enable the monitoring session
Answer: A
NEW QUESTION 33
The UCS Chassis Discovery Policy has been set to four and a new chassis is connected with two links What is the resulting chassis recognition action?
- A. The chassis will not be recognized
- B. The Chassis Discovery Policy will automatically reset to two links, since it always tracks the physical connections
- C. The chassis will be recognized and both links will be active
- D. The chassis will be recognized but only one of the links will be active.
Answer: A
NEW QUESTION 34
Which two components are required when the integration of Cisco UCS C-series servers within a Cisco UCS Manager Direct Connect mode? (Choose two )
- A. Compatible Cisco Nexus Fabric Extenders
- B. Compatible UCS VIC adapter installed via the server's PCIe or MLOM slot
- C. Cisco Management Controller
- D. Compatible Cisco UCS Manager version
- E. Compatible UCS 6200 or 6300 Fabric Interconnects
Answer: B,E
NEW QUESTION 35
A Hard Drive (HDD) has been hot swapped in a UCS server blade, however, the UCS Manager GUI is not displaying updated metrics about the replacement drive. What action will be required to properly display updated metrics?
- A. Reboot the server.
- B. Reboot the Fabric Interconnects
- C. Remove and re-insert the server blade HDD controller mezzanine card
- D. Use the CLI, since HDD metrics cannot be displayed with the UCS Manager GUI
Answer: C
NEW QUESTION 36
After installing a new UCS M4 server, which two Cisco Integrated Management Controller connectivity options do you have? (Choose two )
- A. In-band Access
- B. Web Access
- C. Out-of-Band Access
- D. XML API Access
- E. SNMP
Answer: A,D
NEW QUESTION 37
When it comes to pinning vNIC traffic from a UCS Server to the Fabric Interconnect uplink what configuration can you perform?
- A. You can configure Automatic Uplink Pinning. If an uplink interface fails on one Fabric Interconnect the server will fail to the matching uplink on the other Fabric Interconnect
- B. You can configure Static Uplink Pinning. If an uplink interface fails on one Fabric Interconnect the server will fail to the matching uplink on the other Fabric Interconnect
- C. You can configure Static Uplink Pinning. If an uplink interface fails on one Fabric Interconnect, the server will fail to the first available uplink on the other Fabric Interconnect
- D. You can configure Automatic Uplink Pinning. If an uplink interface fails on one Fabric Interconnect, the server will fail to the first available uplink on the other Fabric Interconnect
- E. You can configure Static Uplink Pinning. If an uplink interface fails on one Fabric Interconnect, the server will fail to the first available uplink on the same Fabric Interconnect
Answer: D
NEW QUESTION 38
......
500-920 EXAM DUMPS WITH GUARANTEED SUCCESS: https://prep4sure.real4dumps.com/500-920-prep4sure-exam.html
