Pass Authentic Network Appliance NS0-164 with Free Practice Tests and Exam Dumps
New NS0-164 Exam Questions Real Network Appliance Dumps
NEW QUESTION # 111
What needs to be enabled on an ONTAP SMB share to increase data throughput and fault tolerance for Microsoft SQL Server databases?
- A. Round-robin
- B. Multi-channel
- C. Initiator group
- D. Multipathing
Answer: B
NEW QUESTION # 112
What would allow for an automatic switchover of an SM-BC relationship in case of a site disaster7
- A. ONTAP Mediator
- B. Storage failover
- C. Automated unplanned switchover
- D. Cluster failover
Answer: A
NEW QUESTION # 113
In which two tools can an administrator identify security vulnerabilities and receive actionable intelligence? (Choose two.)
- A. Active IQ Digital Advisor
- B. ONTAP System Manager
- C. NetApp Harvest 2.0
- D. BlueXP Classification
Answer: A,D
NEW QUESTION # 114
Alter issuing the vol split vol0/plex0 volNew command:
- A. There is a new mirrored volume called volNew.
- B. There are two new plexes, plex0 and plexNew.
- C. There is a new plex called plexNew.
- D. There are two unmirrored volumes, vol0 and volNew.
Answer: D
NEW QUESTION # 115
Which one of the following actions will cause a currently in sync snapmirror relationship to fall out of sync?
- A. Modifying the /etc/snapmirror.conf file on the destination storage appliance
- B. Modifying the /etc/snapmirror.conf file on the source storage appliance
- C. Running snapmirror update on the source storage appliance
- D. Running snapmirror release on the source storage appliance
Answer: A
NEW QUESTION # 116
Which Data ONTAP option would you enable to set system wide throttling for all transfers?
- A. options transfer.throttle.enable
- B. options replication.wide.enable
- C. options transfer.wide.enable
- D. options replication.throttle.enable
Answer: D
NEW QUESTION # 117
What predefined SVM role provides management for NDMP operations?
- A. vsadmin-protocol
- B. vsadmin-readonly
- C. vsadmin-backup
- D. wsadmin-voluma
Answer: C
NEW QUESTION # 118
After configuring an ONTAP duster for SAN access, the administrator is notified that the cluster nodes are connected to separate fc switches.
Given the following output:
What action will correct the redundancy issue?
- A. swap cable at node-01 / lb with cable at node-02 / lb
- B. swap cable at node-01 / Id with cable at node-02 / Id
- C. swap cable at node-01 / la with cable at node-01 / Id
- D. swap cable at node-01 / lc with cable at node-02 / lc
Answer: B
NEW QUESTION # 119
Data ONTAP uses inodes in an active file system to reference.
- A. file segments
- B. qtrees
- C. disk blocks
- D. snapshots
Answer: C
NEW QUESTION # 120
It is the use of the -Lflag in the snapmirror initialize command and the subsequent successful level 0 transfer that causes the destination volume to become snaplocke?
- A. True
- B. False
Answer: A
NEW QUESTION # 121
A volume is SnapMirrored hourly. You revert the volume using a snapshot that was created two days ago.
Which command continues the relationship?
- A. SnapMirror quiesce
- B. SnapMirror update.
- C. SnapMirror resync
- D. SnapMirror resume
- E. SnapMirror initialize
Answer: C
NEW QUESTION # 122
Which two items can a LIF represent? (Choose two).
- A. an IP address.
- B. a VLAN.
- C. an interface group.
- D. a WWPN.
Answer: A,D
NEW QUESTION # 123
Which two protocols provide NAS access for home directories on an S VM? (Choose two.)
- A. NFS
- B. iSCSI
- C. FC
- D. SMB
- E. NVMe/TCP
Answer: A,D
NEW QUESTION # 124
What command would you enter to restore the /vol/flexvol0/etc/rc file from a snapshot to the /vol/flexvol0
/home directory?
- A. snap restore -s /vol/flexvol0/home/rc /vol/flexvol0/etc/rc
- B. snap restore -t /vol/flexvol0/home/rc /vol/flexvol0/etc/rc
- C. snap restore -t file -r /vol/flexvol0/home/rc /vol/flexvol0/etc/rc
- D. snap restore -r vol /vol/flexvol0/home/rc /vol/flexvol0/etc/rc
Answer: C
NEW QUESTION # 125
When you are zoning, which method does NetApp recommend for NetApp ONTAP SAN environments?
- A. single-initiator zoning by using the storage VM worldwide node name (WWNN).
- B. single-initiator zoning by using both the FC LIF WWPNs and the FC physical port WWPNs.
- C. single-initiator zoning by using the FC physical port WWPNs.
- D. single-initiator worldwide port name (WWPN) and one or multiple target LIFs' WWPNs from the storage VM.
Answer: D
NEW QUESTION # 126
The Snap Vault secondary system makes a snapshot of its own volume where the qtrees are located.
- A. True
- B. False
Answer: A
NEW QUESTION # 127
Exhibit:
To remove a cluster setup, you must perform the steps displayed in the exhibit.
- A. True
- B. False
Answer: A
NEW QUESTION # 128
Five minutes ago, you performed a single file SnapRestore on a large NFS file. 40% of your NFS users are now complaining about getting "stale file handles" for the file.
Which one of the following is the most likely cause of this problem, and the best procedure to correct it?
- A. NFS users who try to access a reverted file without first reopening it might get a "stale file handle" error message. Have the users try to reopen the file and see if the problem is resolved.
- B. This might be due to an NFS storage appliance and client version mis-match. Check to see that these users have the same version of the NFS client that existed at the time the snapshot was taken.
- C. After a single file SnapRestore, NFS users have to reboot their systems. Have them reboot their systems.
- D. These users are on a different subnet from the others. Start troubleshooting by checking their subnet.
Answer: A
NEW QUESTION # 129
Which capacity and parity savings feature is configured at the factory with all AFF systems?
- A. RAID-TEC
- B. RAID4
- C. ADP root-data
- D. ADP root-data-data
Answer: D
NEW QUESTION # 130
Which two steps should an administrator take to create a two-node ONTAP Select cluster that spans two data centers and provide automated switchover without any data loss? (Choose two.)
- A. Set up a SnapMirror Synchronous relationship in StrictSync mode to prevent any data loss in case of a failover
- B. Use ONTAP Mediator service to make sure that a quorum exists for the two nodes
- C. Use ONTAP Select Deploy to install the nodes on the VMware environment
- D. Make sure that the ONTAP Select Deploy VM resides at a third location other than the two data centers
Answer: B,C
NEW QUESTION # 131
When you are setting up SnapMirror, which one of the following is not a replication pre-requisite?
- A. The source volume must be offline.
- B. The capacity of the SnapMirror destination must be greater than or equal to the capacity of the source.
- C. If you are replicating a volume, you must create a restricted volume to be used as the SnapMirror destination volume.
- D. SnapMirror must be licensed for each storage appliance.
Answer: A
NEW QUESTION # 132
SnapMirror will automatically tiy to restart a transfer after_________.
- A. A transfer interrupted by reboot
- B. Ail initial transfer is interrupted
- C. A manual update is interrupted
- D. A scheduled incremental update is interrupted
Answer: D
NEW QUESTION # 133
By which method does Cloud Volumes ONTAP contribute to business continuity and disaster recovery?
- A. providing automatic failover capabilities.
- B. enabling a secondary disaster recovery site in the public cloud.
- C. maintaining multiple data centers.
- D. ensuring real-time data analytics.
Answer: B
NEW QUESTION # 134
When adding an FC initiator identifier to an initiator group, which identifier should you use?
- A. Target Portal Group (TPG) tag.
- B. host bus adaptor (HBA) worldwide node name (WWNN).
- C. software initiator iSCSl Qualified Name (IQN).
- D. host bus adapter (HBA) worldwide port name (WWPN).
Answer: D
NEW QUESTION # 135
......
NS0-164 Exam Info and Free Practice Test Professional Quiz Study Materials: https://prep4sure.real4dumps.com/NS0-164-prep4sure-exam.html
