NEW 2023 Certification Sample Questions 156-585 Dumps & Practice Exam
156-585 Deluxe Study Guide with Online Test Engine
The 156-585 exam covers a wide range of topics, including advanced troubleshooting techniques, configuration optimization, and performance tuning. Candidates must also have a deep understanding of network protocols, security policies, and traffic inspection. The exam is composed of 90 multiple-choice questions and has a time limit of 120 minutes. A passing score of 70% or higher is required to become certified.
NEW QUESTION # 20
What are the maximum kernel debug buffer sizes, depending on the version
- A. 32MB or 64MB
- B. 8GB or 64GB
- C. 8MB or 32MB
- D. 4MB or 8MB
Answer: C
NEW QUESTION # 21
You are upgrading your NOC Firewall (on a Check Point Appliance) from R77 to R80 30 but you did not touch thesecuritypolicy After the upgrade you can't connect to the new R80 30 SmartConsole of the upgraded Firewall anymore What is a possible reason for this?
- A. the license became invalig and the firewall does not start anymore
- B. new new console port is 19009 and a access rule ts missing
- C. the upgrade process changed the interfaces and IP adresses and you have to switch cables
- D. the IPS System on the new R80.30 Version prohibits direct Smartconsole access to a standalone firewall
Answer: D
NEW QUESTION # 22
Which process is responsible for the generation of certificates?
- A. cpm
- B. dbsync
- C. cpca
- D. fwm
Answer: C
NEW QUESTION # 23
For TCP connections, when a packet arrives at the Firewall Kemel out of sequence or fragmented, which layer of IPS corrects this lo allow for proper inspection?
- A. Context Management
- B. Passive Streaming Library
- C. Protections
- D. Protocol Parsers
Answer: A
NEW QUESTION # 24
Which of the following is NOT a vpn debug command used for troubleshooting?
- A. vpn debug trunc
- B. vpn debug on TDERROR_ALL_ALL=5
- C. pclient getdata sslvpn
- D. fw ctl debug -m fw + conn drop vm crypt
Answer: C
NEW QUESTION # 25
When a User Mode process suddenly crashes it may create a core dump file. Which of the following information is available in the core dump and may be used to identify the root cause of the crash?
i Program Counter
ii Stack Pointer
ii. Memory management information
iv Other Processor and OS flags / information
- A. iii and iv only
- B. D Only iii
- C. i and n only
- D. i, ii, lii and iv
Answer: A
NEW QUESTION # 26
Which of the following is contained in the System Domain of the Postgres database?
- A. Configuration data of log servers
- B. Saved queries for applications
- C. Trusted GUI clients
- D. User modified configurations such as network objects
Answer: D
NEW QUESTION # 27
Which daemon governs the Mobile Access VPN blade and works with VPND to create Mobile Access VPN connections? It also handles interactions between HTTPS and the Multi-Portal Daemon.
- A. SSL VPN Daemon - sslvpnd
- B. mvpnd
- C. Mobile Access Daemon - MAD
- D. Connectra VPN Daemon - cvpnd
Answer: D
NEW QUESTION # 28
Which is the correct "fw monitor" syntax for creating a capture file for loading it into WireShark?
- A. fw monitor -e "accept<FILTER EXPRESSION>;" -o Output.cap
- B. fw monitor -e "accept<FILTER EXPRESSION>;" -file Output.cap
- C. This cannot be accomplished as it is not supported with R80.10
- D. fw monitor -e "accept<FILTER EXPRESSION>;" >> Output.cap
Answer: A
NEW QUESTION # 29
What is the purpose of the Hardware Diagnostics Tool?
- A. Verifying that Security Gateway hardware is functioning correctly
- B. Verifying the Security Management Server hardware is functioning correctly
- C. Verifying that Check Point Appliance hardware is functioning correctly
- D. Verifying that Check Point Appliance hardware is actually broken
Answer: B
NEW QUESTION # 30
Joey is configuring a site-to-site VPN with his business partner. On Joey's site he has a Check Point R80.10 Gateway and his partner uses Cisco ASA 5540 as a gateway.
Joey's VPN domain on the Check Point Gateway object is manually configured with a group object that contains two network objects:
VPN_Domain3 = 192.168.14.0/24
VPN_Domain4 = 192.168.15.0/24
Partner's site ACL as viewed from "show run"
access-list JOEY-VPN extended permit ip 172.26.251.0 255.255.255.0 192.168.14.0 255.255.255.0 access-list JOEY-VPN extended permit ip 172.26.251.0 255.255.255.0 192.168.15.0 255.255.255.0 When they try to establish VPN tunnel, it fails. What is the most likely cause of the failure given the information provided?
- A. Tunnel fails on partner site. It is likely that the Cisco ASA 5540 will reject the Phase 2 negotiation. Check Point continues to present its own encryption domain as 192.168.14.0/23, but the peer expects the two distinct networks 192.168.14.0/24 and 192.168.15.0/24.
- B. Tunnel falls on partner site. It is likely that the Cisco ASA 5540 will reject the Phase 2 negotiation. Check Point continues to present its own encryption domain as 192.168.14.0/24 and 192.168.15.0/24, but the peer expects the one network 192.168.14.0/23
- C. Tunnel fails on Joey's site, because he misconfigured IP address of VPN peer.
- D. Tunnel falls on partner site. It is likely that the Cisco ASA 5540 will reject the Phase 2 negotiation due to the algorithm mismatch.
Answer: A
NEW QUESTION # 31
John has renewed his NGTX License but he gets an error (contract for Anti-Bot expired). He wants to check the subscription status on the CU of the gateway, what command can he use for this?
- A. show license status
- B. cpstat antimalware -I subscription _status
- C. fwm lie print
- D. fw monitor license status
Answer: A
NEW QUESTION # 32
When running a debug with fw monitor, which parameter will create a more verbose output?
- A. -i
- B. -i
- C. -d
- D. -0
Answer: C
NEW QUESTION # 33
You are running R80.XX on an open server and you see a high CPU utilization on your 12 CPU cores You now want to enable Hyperthreading to get more cores to gain some performance. What is the correct way to achieve this?
- A. Hyperthreading is not supported on open servers, on on Check Point Appliances
- B. in dish run set HAT on
- C. just turn on HAT in the bios of the server and after it has booted enable it in cpconfig
- D. just turn on HAT in the bios of the server and boot it
Answer: B
NEW QUESTION # 34
Which of the following is a component of the Context Management Infrastructure used to collect signatures in user space from multiple sources, such as Application Control and IPS. and compiles them together into unified Pattern Matchers?
- A. CMI Loader
- B. cpas
- C. Context Loader
- D. PSL - Passive Signature Loader
Answer: A
NEW QUESTION # 35
Which of the following is NOT a valid "fwaccel" parameter?
- A. packets
- B. stat
- C. templates
- D. stats
Answer: A
NEW QUESTION # 36
You are running R80.XX on an open server and you see a high CPU utilization on your 12 CPU cores You now want to enable Hyperthreading to get more cores to gain some performance. What is the correct way to achieve this?
- A. just turn on HAT in the bios of the server and after it has booted enable it in cpconfig
- B. in dish run set HAT on
- C. Hyperthreading is not supported on open servers, on on Check Point Appliances
- D. just turn on HAT in the bios of the server and boot it
Answer: C
NEW QUESTION # 37
Rules within the Threat Prevention policy use the Malware database and network objects. Which directory is used for the Malware database?
- A. $CPDIR/conf/install_manager_lmp/ANTIMALWARE/conf/
- B. $FWDlR/conf/install_firewall_imp/ANTIMALWARE/conf/
- C. $FWDIR/conf/install_manager_tmp/ANTIMALWARE/conf/
- D. $FWDlR/log/install_manager_tmp/ANTIMALWARBlog?
Answer: C
NEW QUESTION # 38
If IPS protections that prevent SecureXL from accelerating traffic, such as Network Quota, Fingerprint Scrambling. TTL Masking etc, have to be used, what is a recommended practice to enhance the performance of the gateway?
- A. Upgrade the hardware to include more Cores and Memory
- B. Use the IPS exception mechanism
- C. Disable SecureXL and use CoreXL
- D. Disable all such protections
Answer: C
NEW QUESTION # 39
What components make up the Context Management Infrastructure?
- A. CPX and FWM
- B. CMI Loader and Pattern Matcher
- C. CPMI and FW Loader
- D. CPM and SOLR
Answer: B
NEW QUESTION # 40
Which command can be run in Expert mode to verify the core dump settings?
- A. grep cdm /config/db/initial
- B. grep cdm /config/db/coredump
- C. cat /etc/sysconfig/coredump/cdm.conf
- D. grep $FWDIR/config/db/initial
Answer: D
NEW QUESTION # 41
You have configured IPS Bypass Under Load function with additional kernel parameters ids_tolerance_no_stress=15 and ids_tolerance_stress-15 For configuration you used the *fw ctl set' command After reboot you noticed that these parameters returned to their default values What do you need to do to make this configuration work immediately and stay permanent?
- A. Set these parameters again with "fw ctl set" and save configuration with "save config"
- B. Use script $FWDIR/bin IpsSetBypass.sh to set these parameters
- C. Set these parameters again with "fw ctl set" and edit appropriate parameters in $FWDIR/boot/modules/ fwkern.conf
- D. Edit appropriate parameters in $FWDIR/boot/modules/fwkern.conf
Answer: C
Explanation:
Explanation
https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=
NEW QUESTION # 42
Which situation triggers an IPS bypass under load on a 24-core Check Point appliance?
- A. a single CPU core must be above the threshold for more than 10 seconds, but is must be the same core during this time
- B. any of the CPU cores is above the threshold for more than 10 seconds
- C. all CPU core most be above the threshold for more than 10 seconds
- D. the average cpu utilization over all cores must be above the threshold for 1 second
Answer: B
NEW QUESTION # 43
Which of the following is contained in the System Domain of the Postgres database?
- A. User modified configurations such as network objects
- B. Configuration data of log servers
- C. Trusted GUI clients
- D. Saved queries for applications
Answer: C
NEW QUESTION # 44
......
Registration Process for the CheckPoint 156-585 certification Exam:
CheckPoint 156-585 exam dumps elaborates that In order to register for the CheckPoint 156-585 exam, you will have to visit the ISC2 website and create a profile. This way, when you get ready to take the exam, you will be able to log in and pay for the test directly from the ISC2 website. After this, you will be required to wait until your account is activated. This process may take 05 to 07 days. Once your account is active, you will be allowed a certain number of attempts at each question on each practice test until you pass. Accessible on the ISC2 website, it is very simple to prepare for this test.
156-585 dumps review - Professional Quiz Study Materials: https://prep4sure.real4dumps.com/156-585-prep4sure-exam.html
