Citrix 1Y0-241 Questions and Answers Guarantee you Oass the Test Easily
Share Latest 1Y0-241 DUMP with 113 Questions and Answers
NEW QUESTION # 19
Which step can a Citrix Administrator take to use default compression policies?
- A. Disable the Citrix ADC compression feature at a global level.
- B. Select the compression algorithm (gzip/deflate/identity).
- C. Bind the default compression policies to the vServer.
- D. Enable compression on the associated bound services.
Answer: D
Explanation:
To put a compression policy into effect, you must bind it either globally, so that it applies to all traffic that flows through the Citrix ADC, or to a specific virtual server, so that the policy applies only to requests whose destination is the VIP address of that virtual server.
By default, compression is disabled on the Citrix ADC. You must enable the feature before configuring it. You can enable it globally so that it applies to all HTTP and SSL services, or you can enable it just for specific services.
https://docs.citrix.com/en-us/citrix-adc/current-release/load-balancing/load-balancing-advanced-settings/enable-compression-on-service.htm
NEW QUESTION # 20
Scenario: A Citrix Administrator executed the following commands on the Citrix ADC:
> add policy dataset Admin_group ipv4
> bind policy dataset Admin_group 192.168.149.10 -index 11
> bind policy dataset Admin_group 192.168.149.39 -index 12
> bind policy Admin_group 192.168.149.49 -index 13
> add responder policy POL_1 "!(CLIENT.IP.SRC.TYPECAST_TEXT_T.CONTAINS_ANY(\"Admin_group\"))" RESET
> bind lb vServer lb_vsrv_www -policyName POL_1 -priority 100 -gotoPriorityExpression END -type REQUEST What will be the effect of these commands?
- A. Only users with a source IP address of 192.168.149.10, 192.168.149.39, or 192.168.149.49 will be allowed to connect to vServer lb_vsrv_www.
- B. All traffic from users with a source IP address of 192.168.149.10, 192.168.149.39, or 192.168.149.49 will be blocked through the Citrix ADC.
- C. Only users with a source IP address of 192.168.149.10 or 192.168.149.39 will be allowed to connect to vServer lb_vsrv_www.
- D. Only users with a source IP address of 192.168.149.10, 192.168.149.39, or 192.168.149.49 will be blocked when attempting to connect to vServer lb_vsrv_www.
Answer: A
NEW QUESTION # 21
Scenario: The Citrix Administrator of a Linux environment needs to load balance the web servers. Due to budget constraints, the administrator is NOT able to implement a full-scale solution.
What can the administrator purchase and install to load balance the webservers?
- A. Citrix ADC MPX
- B. Citrix ADC VPX
- C. Citrix ADC CPX
- D. Citrix ADC SDX
Answer: C
Explanation:
Explanation
it is the CPX, which is not a full scale solution. You don't need a full virtual like VPX to run CPX inside Docker for Linux, that is the budget choice.
NEW QUESTION # 22
Scenario: A Citrix Administrator gives permissions to team members to access their own admin partition. This will allow them to add resources for different departments and manage them without making changes to the default Citrix ADC partition and configuration.
One team member typing to use the command line interface (CLI) to troubleshoot an authentication issue could NOT use aaad.debug. However, the team member has full permissions on the admin partition.
What can be the cause of this issue?
- A. The team member needs to troubleshoot the issue from the GUI.
- B. The team member does NOT have permission to use the CLI.
- C. The team member does NOT have shell access by design.
- D. The team member is NOT using the CLI correctly.
Answer: C
Explanation:
https://docs.citrix.com/en-us/citrix-adc/current-release/admin-partition.html
NEW QUESTION # 23
Scenario: While using the GUI, a Citrix ADC MPX appliance becomes unresponsive. A Citrix Administrator needs to restart the appliance and force a core dump for analysis.
What can the administrator do to accomplish this?
- A. Use the reset button on the front of the appliance.
- B. Connect to a USB port to issue a restart command.
- C. Turn off the appliance using the power button.
- D. Use the NMI button on the back of the appliance.
Answer: D
Explanation:
Explanation
https://support.citrix.com/article/CTX120660
NEW QUESTION # 24
Scenario: A Citrix Administrator manages an environment that has a Citrix ADC high availability (HA) pair running on two MPX appliances. The administrator notices that the state of the secondary Citrix ADC is
'Unknown'.
What is causing the secondary state to be 'Unknown'?
- A. The remote procedure call (RPC) nodes are incorrectly configured.
- B. The administrator made both Citrix ADCs primary.
- C. TCP port 22 is disabled between the primary and secondary ADCs.
- D. The synchronization on the secondary appliance is disabled.
Answer: A
NEW QUESTION # 25
Scenario: A Citrix Administrator needs to configure persistence on a global server load balancing (GSLB) vServer to which a service is bound. Service must continue to handle requests from the client even after it is disabled manually - accepting new requests or connections only to honor persistence. After a configured period of time, no new requests or connections are directed to the service and all existing connections are closed.
To achieve these requirements, which parameter can the administrator configure while disabling the service?
- A. Request threshold
- B. Persistence threshold
- C. Persistence time-Out
- D. Wait time
Answer: C
NEW QUESTION # 26
Scenario: A Citrix Administrator needs to improve website loading speed. End users are reporting slow GIF image rendering speeds as they scroll down a website, which affects overall page load time.
Which Citrix ADC feature can the administrator enable to improve website performance?
- A. Image lazy loading
- B. Image optimization
- C. Image shrink-to attributes
- D. Domain sharding
Answer: B
NEW QUESTION # 27
Which Citrix ADC Access Control List (ACL) command can a Citrix Administrator use to bridge traffic originating from the IP address 192.168.10.200?
- A. add ns simpleacl
- B. add ns acl
- C. add ns acl6
- D. add ns simpleacl6
Answer: B
Explanation:
Explanation
https://developer-docs.citrix.com/projects/citrix-adc-command-reference/en/latest/ns/ns-acl/
NEW QUESTION # 28
Which two protocols would provide end-to-end data encryption, while allowing a Citrix ADC to optimize the responses? (Choose two.)
- A. SSL bridge protocol for the services
- B. HTTP protocol for the services
- C. SSL bridge protocol for the vServer
- D. SSL protocol for the services
- E. SSL protocol for the vServer
- F. HTTP protocol for the vServer
Answer: D,E
NEW QUESTION # 29
Scenario: A Citrix Administrator needs to improve website loading speed. End users are reporting slow GIF image rendering speeds as they scroll down a website, which affects overall page load time.
Which Citrix ADC feature can the administrator enable to improve website performance?
- A. Image lazy loading
- B. Image optimization
- C. Image shrink-to attributes
- D. Domain sharding
Answer: B
Explanation:
Explanation
Reduces the image to the size indicated in the image tag by Citrix ADC, enabling client browsers to load images faster. https://docs.citrix.com/en-us/citrix-adc/current-release/optimization/front-end-optimization.html
NEW QUESTION # 30
Scenario: A Citrix Administrator is running an e-commerce web service that uses backend SQL and RADIUS servers. The e-commerce platform runs on a web server using port 80, and a website status page on port 99 reports the status of all servers.
Which monitor should the administrator choose to confirm the availability of the e-commerce solution?
- A. HTTP-ECV on port 80
- B. HTTP_ECV on port 99
- C. HTTP on port 99
- D. HTTP on port 80
Answer: B
Explanation:
Explanation
destPort TCP or UDP port to which to send the probe. If the parameter is set to 0, the port number of the service to which the monitor is bound is considered the destination port. For a monitor of type USER, however, the destination port is the port number that is included in the HTTP request sent to the dispatcher.
Does not apply to monitors of type PING.
NEW QUESTION # 31
Scenario: A Citrix Administrator is running an e-commerce web service that uses backend SQL and RADIUS servers. The e-commerce platform runs on a web server using port 80, and a website status page on port 99 reports the status of all servers.
Which monitor should the administrator choose to confirm the availability of the e-commerce solution?
- A. HTTP-ECV on port 80
- B. HTTP_ECV on port 99
- C. HTTP on port 99
- D. HTTP on port 80
Answer: B
NEW QUESTION # 32
Scenario: A Citrix Administrator configured a load-balancing vServer. The URL for this vServer is vpn.citrix.com. The backend server has the host name configured as server1.citrix.com.
The administrator needs to implement the policy to change the host name from vpn.citrix.com to server1.citrix.com, and vice versa.
Which does the administrator need to configure to meet this requirement?
- A. set transform action "host change" -priority 10 -reqUrlFrom "https://vpn.citrix.com/*" -reqUrlInto "https:// server1.citrix.com/*" -resUrlFrom "https://server1.citrix.com/*" -resUrlInto "https://vpn.citrix.com/*"
- B. set transform action "host change" -priority 10 -reqUrlFrom "https://server1.citrix.com/*" -reqUrlInto "https:// vpn.citrix.com/*" -resUrlFrom "https://vpn.citrix.com/*" -resUrlInto "https://server1.citrix.com/*"
- C. set transform action "host change" -priority 10 -reqUrlFrom "https://server1.citrix.com/*" -reqUrlInto "https:// vpn.citrix.com/*" -resUrlFrom "https://server1.citrix.com/*" -resUrlInto "https://vpn.citrix.com/*"
- D. set transform action "host change" -priority 10 -reqUrlFrom "https://vpn.citrix.com/*" -reqUrlInto "https:// server1.citrix.com/*" -resUrlFrom "https://vpn.citrix.com/*" -resUrlInto "https://server1.citrix.com/*"
Answer: A
NEW QUESTION # 33
Scenario: The primary content switching vServer has gone down. To troubleshoot, a Citrix Administrator has issued the following command:
> show csvserver CSV
CSV (10.1.100.100:443) - HTTPS Type: CONTENT
State: UP
Last state change was at Mon Jun 29 15:20:43 2020
Time since last state change: 1 day, 06:47:58 610
Client Idle Timeout: 180 sec
Down state flush: ENABLED
Disable Primary vServer On Down: DISABLED
Appflow logging: ENABLED
Port Rewrite: DISABLED
State Update: DISABLED
Default: Content Precedence: URL
vServer IP and Port insertion: OFF
Persistence:
NONE redirect: http://www.site1.com/mysite1/maintenance
Backup: vServer-LB-2
Listen Policy: NONE
IcmpResponse: PASSIVE
RHIstate: PASSIVE
Traffic Domain: 0
Based on this output, where will the subsequent request be redirected?
- A. vServer-LB-2
- B. Backup content switching vServer
- C. http://www.site1.com/mysite1/maintenance
- D. 10.1.100.100:443
Answer: C
NEW QUESTION # 34
Scenario: A Citrix Administrator configured a responder policy as follows:
> add responder action Redirect_Act respondwith "DIAMETER.NEW_REDIRECT(\"aaa://host.example.com\")"
> add responder policy Redirect_Pol "diameter.req.avp(264).value.eq(\"host1.example.net\")" Redirect_Act
> bind lb vServer vs1 -policyName Redirect_Pol -priority 10 -type REQUEST What will be the effect of this configuration?
- A. Response originated from "host.example.net" will be redirected to "host1.example.com".
- B. Request originated from "host1.example.net" will be redirected to "host.example.com".
- C. Response originated from "host1.example.net" will be redirected to "host.example.com".
- D. Request originated from "host.example.net" will be redirected to "host1.example.com".
Answer: B
Explanation:
https://docs.citrix.com/en-us/citrix-adc/current-release/appexpert/responder/diameter-support-responder.html
NEW QUESTION # 35
To protect an environment against Hash DoS attacks, which two configurations can a Citrix Administrator use to block all post requests that are larger than 10,000 bytes? (Choose two.)
- A. > add policy expression expr_hashdos_prevention "http.REQ.METHOD.EQ(\"POST\")&&
http.REQ.CONTENT_LENGTH.GT(10000)"
> add rewrite policy drop_rewrite expr_hashdos_prevention DROP
> bind rewrite global drop_rewrite 100 END -type REQ_OVERRIDE - B. > add policy expression expr_hashdos_prevention "http.REQ.METHOD.EQ(\"POST\") ||
http.REQ.CONTENT_LENGTH.GT(10000)"
> add responder policy pol_resp_hashdos_prevention expr_hashdos_prevention DROP NOOP
> bind responder global pol_resp_hashdos_prevention 70 END -type REQ_OVERRIDE - C. > add policy expression expr_hashdos_prevention "http.REQ.METHOD.EQ(\"POST\") ||
http.REQ.CONTENT_LENGTH.GT(10000)"
> add rewrite policy drop_rewrite expr_hashdos_prevention DROP
> bind rewrite global drop_rewrite 100 END -type REQ_OVERRIDE - D. > add policy expression expr_hashdos_prevention "http.REQ.METHOD.EQ(\"POST\") ||
http.REQ.CONTENT_LENGTH.GT(10000)"
> add responder policy pol_resp_hashdos_prevention expr_hashdos_prevention DROP NOOP
> bind responder global pol_resp_hashdos_prevention 100 END -type REQ_OVERRIDE - E. > add policy expression expr_hashdos_prevention "http.REQ.METHOD.EQ(\"POST\")&&
http.REQ.CONTENT_LENGTH.GT(10000)"
> add responder policy pol_resp_hashdos_prevention expr_hashdos_prevention DROP NOOP
> bind responder global pol_resp_hashdos_prevention 70 END -type REQ_OVERRIDE - F. > add policy expression expr_hashdos_prevention "http.REQ.METHOD.EQ(\"POST\") ||
http.REQ.CONTENT_LENGTH.GT(10000)"
> add rewrite policy drop_rewrite expr_hashdos_prevention DROP
> bind rewrite global drop_rewrite 70 END -type REQ_OVERRIDE
Answer: D,E
NEW QUESTION # 36
A Citrix Administrator configured an external syslog server but is NOT seeing detailed TCP information?
What could be causing this?
- A. Log level is NOT enabled.
- B. User-defined audit log is NOT configured.
- C. TCP logging is NOT enabled.
- D. Log facility is NOT configured.
Answer: A
NEW QUESTION # 37
......
Citrix 1Y0-241 exam is designed for IT professionals who are responsible for deploying and managing Citrix ADC 13 with traffic management. Deploy and Manage Citrix ADC 13 with Traffic Management certification exam is aimed at individuals who have experience working with Citrix ADC 13, and who want to demonstrate their knowledge and skills in this area. 1Y0-241 exam covers a range of topics, including installation and configuration, load balancing, SSL offloading, and content switching.
Citrix offers a range of training courses and study materials to help individuals prepare for the 1Y0-241 certification exam. These include instructor-led training, self-paced online training, and eLearning courses. Citrix also offers practice exams and study guides to help individuals prepare for the exam and gain confidence in their knowledge and skills.
Dumps for Free 1Y0-241 Practice Exam Questions: https://prep4sure.real4dumps.com/1Y0-241-prep4sure-exam.html
